7 Segment Counter Display with Ir Sensor !! how to make seven Segment counter display with arduino

हेलो दोश्तो कैसे हो आप | आप सभी दोश्तो का मेरे ब्लॉग ( Digitsl next E ) मे स्वागत है |

आज हम सीखेंगे किस तारिके से एक ( Seven Segment Display) की सहायता से हम counting Display बना सकते है/ इस प्रोजेक्ट को बनाने के लिये हम ( IR ) सेंसर की सहायता से इस प्रोजेक्ट को पूरा करेगे |

इस प्रोजेक्ट का कोड लास्ट में मिलेगा | इस कोड की सहायता से आप और भी प्रोजेक्ट बना सकते हो|

इस project में हमें जो भी कॉम्पोनेन्ट की आवश्यकता है वह सभी नीचे दिए हुए हैं आप भी उन के नाम पर क्लिक करके उन्हें वहां से खरीद सकते हो/ तो चलिए दोस्तों शुरू करते है| आज का यह ब्लॉग |

स्टेप - 1

Breadboard

Arduino Uno

Data Cable

Jumper Wires

Seven Segment Display

Infrare Sensor

स्टेप-2 Sketch

स्टेप- 3

स्टेप-4

Screen Shot 1

Screen Shot 2

स्टेप-5

Video

step-6 code

int  aSegment = 2;
int  bSegment = 3;
int  cSegment = 4;
int  dSegment = 5;
int  eSegment = 6;
int  fSegment = 7;
int  gSegment = 8;
int time = 100;
int t = 0;

// Dharmendra Kumar India

void setup()
{
  for (int x = 2 ; x <= 8 ; x++) {
    pinMode(x, OUTPUT);
  }
  pinMode(aSegment, OUTPUT);
  pinMode(bSegment, OUTPUT);
  pinMode(cSegment, OUTPUT);
  pinMode(dSegment, OUTPUT);
  pinMode(eSegment, OUTPUT);
  pinMode(fSegment, OUTPUT);
  pinMode(gSegment, OUTPUT);
  pinMode( 12, INPUT);
}

void loop()
{
  if (digitalRead(12) == LOW) {
    t++;
    delay(100);
  }

  if (t == 0) {
    pattern0();
  }
  if (t == 1) {
    pattern1();
  }
  if (t == 2) {
    pattern2();
  }
  if (t == 3) {
    pattern3();
  }
  if (t == 4) {
    pattern4();
  }
  if (t == 5) {
    pattern5();
  }
  if (t == 6) {
    pattern6();
  }
  if (t == 7) {
    pattern7();
  }
  if (t == 8) {
    pattern8();
  }
  if (t == 9) {
    pattern9();
  }
  if (t == 10) {
    pattern10();
  }
}
void pattern0() {
  digitalWrite(aSegment, HIGH);
  digitalWrite(bSegment, HIGH);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, HIGH);
  digitalWrite(eSegment, HIGH);
  digitalWrite(fSegment, HIGH);
  digitalWrite(gSegment, LOW);
  delay(time);
}
void pattern1() {
  digitalWrite(aSegment, LOW);
  digitalWrite(bSegment, HIGH);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, LOW);
  digitalWrite(eSegment, LOW);
  digitalWrite(fSegment, LOW);
  digitalWrite(gSegment, LOW);
  delay(time);
}

void pattern2() {
  digitalWrite(aSegment, HIGH);
  digitalWrite(bSegment, HIGH);
  digitalWrite(cSegment, LOW);
  digitalWrite(dSegment, HIGH);
  digitalWrite(eSegment, HIGH);
  digitalWrite(fSegment, LOW);
  digitalWrite(gSegment, HIGH);
  delay(time);
}

void pattern3() {
  digitalWrite(aSegment, HIGH);
  digitalWrite(bSegment, HIGH);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, HIGH);
  digitalWrite(eSegment, LOW);
  digitalWrite(fSegment, LOW);
  digitalWrite(gSegment, HIGH);
  delay(time);
}

void pattern4() {
  digitalWrite(aSegment, LOW);
  digitalWrite(bSegment, HIGH);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, LOW);
  digitalWrite(eSegment, LOW);
  digitalWrite(fSegment, HIGH);
  digitalWrite(gSegment, HIGH);
  delay(time);
}

void pattern5() {
  digitalWrite(aSegment, HIGH);
  digitalWrite(bSegment, LOW);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, HIGH);
  digitalWrite(eSegment, LOW);
  digitalWrite(fSegment, HIGH);
  digitalWrite(gSegment, HIGH);
  delay(time);
}

void pattern6() {
  digitalWrite(aSegment, HIGH);
  digitalWrite(bSegment, LOW);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, HIGH);
  digitalWrite(eSegment, HIGH);
  digitalWrite(fSegment, HIGH);
  digitalWrite(gSegment, HIGH);
  delay(time);
}

void pattern7() {
  digitalWrite(aSegment, HIGH);
  digitalWrite(bSegment, HIGH);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, LOW);
  digitalWrite(eSegment, LOW);
  digitalWrite(fSegment, LOW);
  digitalWrite(gSegment, LOW);
  delay(time);
}

void pattern8() {
  digitalWrite(aSegment, HIGH);
  digitalWrite(bSegment, HIGH);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, HIGH);
  digitalWrite(eSegment, HIGH);
  digitalWrite(fSegment, HIGH);
  digitalWrite(gSegment, HIGH);
  delay(time);
}

void pattern9() {
  digitalWrite(aSegment, HIGH);
  digitalWrite(bSegment, HIGH);
  digitalWrite(cSegment, HIGH);
  digitalWrite(dSegment, HIGH);
  digitalWrite(eSegment, LOW);
  digitalWrite(fSegment, HIGH);
  digitalWrite(gSegment, HIGH);
  delay(time);
}
void pattern10() {
  digitalWrite(aSegment, LOW);
  digitalWrite(bSegment, LOW);
  digitalWrite(cSegment, LOW);
  digitalWrite(dSegment, LOW);
  digitalWrite(eSegment, LOW);
  digitalWrite(fSegment, LOW);
  digitalWrite(gSegment, LOW);
  delay(time);
  t = 0;
}

1. 7 segment display https://amzn.to/3L8Jys0 2. breadboard: https://amzn.to/3J5uzPi 3.Arduino: https://amzn.to/3MJX6fy 4.Jumper Wire: https://amzn.to/3J8Vz03 5. Data Cable: https://amzn.to/3i2zQv0 6. Mic: https://amzn.to/3I757Ym 7.Laptop: https://amzn.to/3w4TXAS 8.Mobile: https://amzn.to/3Jb6XIY 9.Mobile Stand: https://amzn.to/3CzUfAW 10.Infrared Sensor: https://amzn.to/3iQITQd आर्टिकल को पढ़ने के लिए धन्यवाद|

यह ब्लॉग खोजें

Digital Next E

How to make Arduino uno 7 segment counter display || push button || with leds

7 Segment Counter Display with Ir Sensor !! how to make seven Segment counter display with arduino

टिप्पणियाँ

एक टिप्पणी भेजें